Bore Diameter: |
50 mmSee Diagram Image |
Outside Diameter: |
130 mmSee Diagram Image |
Overall Width: |
31 mmSee Diagram Image |
Bore Type: |
Round |
Closure Type: |
Open |
Row Type & Fill Slot: |
Single Row Non-Fill Slot |
Snap Ring Included: |
Without Snap Ring |
Internal Clearance: |
C3 |
Dynamic Load Capacity: |
87.1 kN |
Static Load Capacity: |
52 kN |
Precision Rating: |
ABEC 1 (ISO Class Normal) |
Finish/Coating: |
Uncoated |
Cage Material: |
Steel |
Outer Ring Width: |
31 mm |
Fillet Radius: |
2 mm |
Maximum RPM: |
7500 RPM |
Series: |
64 |
Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread.
In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common.
For big deep groove ball bearings, machined brass cages are used.
Machined cages are also used for high speed applications.
Excellent for high speeds
Good radial load capacity
Acceptable axial load capacity in both directions
Have low torque capacity at startup and running speeds
Can operate with low noise
Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
For more detail, please contact me.